I just received my Metmo Driver and the Multi Drive!
The Driver is an awesome tool that feels so great to just hold and fidget with the mechanism! I bought it with the Leather Expansion Kit! The leather feels so awesome as well!
A question: The driver handle feels too tight and cannot seem to smoothly rotate around the body easily. I loosen the side screws that hold the handle to the body and its a bit better; but then the screws continue to loosen up with rotation of the handle. Is there a sweet spot here?
Has one tried to drill holes in wood with this? How do you attach a standard drill bit (circular body) to this? Any chuck options?
Thanks!
Glad to hear your Driver arrived for you! That is a lovely looking Driver!
If you're finding the body isn't rotating as freely as it should, I'd recommend using the supplied Allen key to loosen the grub screw in the body of the Driver ever so slightly and this will make things smoother. Just a half turn should do it. I wouldn't recommend loosening the handle screws as you don't want them to back out and get lost!
And I think Will has you covered on the drilling front!
Either get hex shank drill bits, or a small chuck w/ a hex end such as:
https://www.amazon.com/Makita-763198-1-Keyless-Chuck/dp/B000O3I5GY
Welcome to the club! I've drilled with it using 1/4 inch hex end drill bits. There is a slight catch in that the Driver chuck doesn't hold them in place so when you try to back off to get the bit out of the wood say it comes out of the chuck instead and you need to pull it with pliers. I imagine using a 1/4 inch hex chuck would do likewise. I bought a cheapy one from Amazon which worked but on reverse the chuck actually unwound and released the round bit I was using!